V košarici ni artiklov.
Podrobnosti artikla
Podrobnosti
SRT10KRMXLI Features
APC Smart-UPS SRT 10000VA RM 230V
-
10/100 BaseT ConnectionConnect the device to a network using a 10 or 100 BaseT connection
-
Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance
-
Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
-
LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.
Smart-UPS On-Line Features & Benefits
Adaptability
-
Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.
-
Flash upgradeable firmwareInstall maintenance releases of firmware remotely using FTP.
-
Plug-and-Play external batteriesEnsures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Manageability
-
SmartSlotCustomize UPS capabilities with management cards.
-
LED status indicatorsQuickly understand unit and power status with visual indicators.
-
Network manageableProvides remote power management of the UPS over the network.
-
InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.
-
Serial connectivityProvides management of the UPS via a serial port.
Protection
-
Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.
-
Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.
-
Cold-start capableProvides temporary battery power when the utility power is out.
-
Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.
-
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
-
Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.
-
Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.
Serviceability
-
Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.
-
User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
-
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
-
Disconnected battery notificationWarns when a battery is not available to provide backup power.
-
Audible alarmsProvides notification of changing utility power and UPS power conditions
Marketing Features
-
Low operating and maintenance costs with proven reliability and intelligent battery management.Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
-
Avoids costly power problems by keeping your IT equipment and data protected and available.Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
-
Save time with easy and convenient remote accessibility.Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
-
Peace of mind that comes with full equipment compatibility and reliability of a leaderProvides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
Availability
-
Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced
-
Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.
-
Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.
-
Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.
-
Scalable runtimeAllows additional run time to be quickly added as needed.
-
Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
Output
-
Output power capacity10.0 KWatts / 10.0 kVA
-
Max Configurable Power (Watts)10.0 KWatts / 10.0 kVA
-
Nominal Output Voltage230V
-
Output Voltage DistortionLess than 2%
-
Output Frequency (sync to mains)50/60Hz +/- 3 Hz
-
Other Output Voltages220, 240
-
Load Crest Factor3 : 1
-
TopologyDouble Conversion Online
-
Waveform typeSine wave
-
Output Connections(6) IEC 320 C13 (Battery Backup)(4) IEC 320 C19 (Battery Backup)
-
BypassInternal Bypass (Automatic and Manual)
Input
-
Nominal Input Voltage230V , 400V 3PH
-
Input frequency40 - 70 Hz (auto sensing)
-
Input ConnectionsHard Wire 3 wire (1PH+N+G), Hard Wire 5-wire (3PH + N + G)
-
Input voltage range for main operations160 - 275 V
-
Input voltage adjustable range for mains operation100 - 275 (half load), 173 - 476 (half load) V
-
Other Input Voltages220, 240, 380, 415
Batteries & Runtime
-
Battery typeMaintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
-
Typical recharge time1.5 hour(s)
-
Replacement BatteryAPCRBC140
-
RBC Quantity2
-
Extendable Run Time1
-
Battery Volt-Amp-Hour Capacity1805
-
Extended Run OptionsAPC-Smart-UPS-SRT-10000VA-RM-230V
-
Runtime
-
Efficiency
Communications & Management
-
Interface Port(s)RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB
-
Control panelMulti-function LCD status and control console
-
Audible AlarmAudible and visible alarms prioritized by severity
-
Emergency Power Off (EPO)Yes
-
Available SmartSlot™ Interface Quantity1
Surge Protection and Filtering
-
Surge energy rating480 Joules
Physical
-
Maximum Height263 , 26.3 cm
-
Maximum Width432 , 43.2 cm
-
Maximum Depth715 , 71.5 cm
-
Rack Height6 U
-
Net Weight111.82 kg
-
Shipping weight130.0 kg
-
Shipping Height461 , 46.1 cm
-
Shipping Width600 , 60.0 cm
-
Shipping Depth1000 , 100.0 cm
-
ColorBlack
Environmental
-
Operating Environment0 - 40 °C
-
Operating Relative Humidity0 - 95% no %
-
Operating Elevation0-3000 meters
-
Storage Temperature-15 - 45 °C
-
Storage Relative Humidity0 - 95% no %
-
Storage Elevation0-15000 meters
-
Audible noise at 1 meter from surface of unit55.0 dBA
-
Online thermal dissipation1947.0 BTU/hr
-
Protection ClassIP 20
Conformance
-
ApprovalsCE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, ENERGY STAR (EU), IRAM, RCM, VDE
-
Standard warranty3 years repair or replace (excluding battery) and 2 years for battery
Sustainable Offer Status
-
RoHSCompliant
-
REACHREACH: Contains No SVHCs
-
Battery DirectiveCompliant
-
Battery Notests_Battery_Notes
Dodatne informacije
Dodatne informacije
Tehnologija | Ne |
---|---|
Oblika izhodne krivulje | Ne |
Blagovna znamka | Ne |
Ocene
Napišite svoj komentar
Samo registrirani uporabniki lahko pišejo ocene in komentarje. Prijavite se ali pa registrirajte.